In BS EN 1092-1:2007, the materials and material groups used in the manufacture of flanges are given in Table 9 and their corresponding.Pressure/Temperature ratings are given in Annex G (normative). Additional materials that are widely in used in Europe are listed in Annex D (informative) but BS EN 1092-1:2007 contains no corresponding Pressure/Temperature information for these materials. National Annex NA (informative) contains guidance on Pressure/Temperature ratings for materials S235JR/1.0038 and ASME SA 105, which are predominantly used in the UK.1. Standard:EN1092-1 2.
Свяжитесь с нами
SS400 S235JR ST37-2 A36 A42 A105 AF48F WP304 , WP304L , WP304H , WP316 , WP316L , WP316Ti , WP309S , WP310S , WP321 , WP321H , WP347 , WP347H , F304 , F304L , F304H , F316 , F316L , F310S , F321 etcProduct Specification:1. Standard:ASME B16.5; ASME B 16.47 Series A(MSS SP-44); ASME B 16.47 Series BAWWA C2072. Type:Plate flange, Slip on ,Threaded, Irrigation,Blind, Lap Joint flange.3. Pressure Class:Class 150; Class 300;Class 400;Class 600;Class 900;Class 1500;Class 25004. Size1/2"-48"5. Surface Treament:Anti-rust oil; Yellow paint; Black paint;Hot dip Galavnised; Zinc.6.
Свяжитесь с нами
EN1092-1 FLANGESize range: DN15 to DN2000Design: type01 plate flange, type02 loose flange, type05 blind flange, type11 welding necking type12 slip on flange, type 13 threaded flangePressure: PN6, PN10, PN16, PN25, PN40, PN64, PN100Material: carbon steel C22.8, S235, S235JR, P235GH, stainless steel: 304/304L, 316/316L1. Standard:EN1092-1 2. Type:Type 01 ;Type 02; Type 05; Type11; Type12; Type133. Pressure Class:PN6;PN10; PN16; PN25; PN40; 4. Dimension:DN10-20005.
Свяжитесь с нами
The pressure marking specified in this standard is divided into PN marking and Class marking.PN marking has 12 pressure ratingsThey are: PN2.5; PN6; PN10; PN16; PN25; PN40; PN63; PN100; PN160; PN250; PN320; PN4001. Standard:ASME B16.5; ASME B 16.47 Series A(MSS SP-44); ASME B 16.47 Series BAWWA C2072. Type:Plate flange, Slip on ,Threaded, Irrigation,Blind, Lap Joint flange.3. Pressure Class:Class 150; Class 300;Class 400;Class 600;Class 900;Class 1500;Class 25004. Size1/2"-48"5. Surface Treament:Anti-rust oil; Yellow paint; Black paint;Hot dip Galavnised; Zinc.6.
Свяжитесь с нами
A blind flange is a solid flange as shown below. The purpose of these is to block off a section ofpipe or a nozzle on a vessel that is not used. (A nozzle is typically a pipe coming out of a vessel and
is usually flanged so it can be connected to valves or piping). Many times a nozzle will be blanked
off with a blind flange for pressure tests in a plant, or simply because the customer does not need
all the nozzles that were supplied on the tank.1. Standard:GOST 12820- 80 GOST 12821- 80 2. Type:Plate flange, Threaded, Irrigation,Blind, Lap Joint flange. Type3.
Свяжитесь с нами
whereas ISO 7005-1 included in its scope both the original DIN based flanges and also the originalANSI/ASME based flanges, EN 1092-1 contains only the PN based flanges. CEN/TC 74 has produced
a separate series of standards, EN 1759-1, EN 1759-3 and EN 1759-4, dealing with the ANSI/ASME
based flanges in their original Class designations;1. Standard:BS4504 2. Type:Plate flange, Threaded, Irrigation,Blind, Lap Joint flange. Type3. Pressure Class:PN6;PN10; PN16; PN25; PN40; 4. Dimension:DN10-20005. Surface Treament:Anti-rust oil; Yellow paint; Black paint;Hot dip Galavnised; Zinc.6.
Свяжитесь с нами
Used for the connection between the tube end in chemical, construction, water supply, drainage, oil and gas, light and heavy industrial, refrigeration, sanitation, plumbing, fire protection, electrical, aerospace, shipbuilding and other infrastructure projects
Свяжитесь с нами
Our group:Jinan Jiang Hua Forging Machinery Co.,Ltd was established in 1995. The company located in the eastern suburd of Jinan,possesses a favorable position: with Jinan International Airport to its west and Qingdao Port to its east. The company covers 48000 square meters, has 38,000,000,000 RMB investment and possesses 360 staffs and more than 30 technicians.
Свяжитесь с нами
Production Process:Our group:Jinan Jiang Hua Forging Machinery Co.,Ltd was established in 1995. The company located in the eastern suburd of Jinan,possesses a favorable position: with Jinan International Airport to its west and Qingdao Port to its east. The company covers 48000 square meters, has 38,000,000,000 RMB investment and possesses 360 staffs and more than 30 technicians.
Свяжитесь с нами
1. Standard:DIN2502,DIN2503,DIN2527,DIN2566.DIN2573,DIN2576; DIN2633 ; DIN2632; DIN2631;DIN25662. Type:Plate flange, Threaded, Irrigation,Blind, Lap Joint flange.3. Pressure Class:PN6;PN10; PN16; PN25; PN40; 4. Dimension:DN10-20005. Surface Treament:Anti-rust oil; Yellow paint; Black paint;Hot dip Galavnised; Zinc.6. Raw Material:RST 37.2; P245GH ; S235JR7. PackingWooden Case, Pallet.8. Payment:L/C, T/T, Western Union, PayPal9. Delivery time:30 ~60 days after confirm the order1. Standard:DIN2502,DIN2503,DIN2527,DIN2566.DIN2573,DIN2576; DIN2633 ; DIN2632; DIN2631;DIN25662.
Свяжитесь с нами
Q: Can you produce the products according to my own drawings?A: Yes, we can produce the products according to your drawings.we have profession engineers in our factory .1. Standard:ASME B16.5; ASME B 16.47 Series A(MSS SP-44); ASME B 16.47 Series BAWWA C2072. Type:Plate flange, Slip on ,Threaded, Irrigation,Blind, Lap Joint flange.3. Pressure Class:Class 150; Class 300;Class 400;Class 600;Class 900;Class 1500;Class 25004. Size1/2"-48"5. Surface Treament:Anti-rust oil; Yellow paint; Black paint;Hot dip Galavnised; Zinc.6. Raw Material:A105; A105N7. PackingWooden Case, Pallet.8.
Свяжитесь с нами
In addition to the range of PN 2,5 to PN 40 DIN origin flanges contained in the ISO standard, EN 1092-1 also includes flanges up to PN 400. 1. Standard:BS4504 2. Type:Plate flange, Threaded, Irrigation,Blind, Lap Joint flange. Type3. Pressure Class:PN6;PN10; PN16; PN25; PN40; 4. Dimension:DN10-20005. Surface Treament:Anti-rust oil; Yellow paint; Black paint;Hot dip Galavnised; Zinc.6. Raw Material:RST 37.2; P245GH ; S235JR7. PackingWooden Case, Pallet.8. Payment:L/C, T/T, Western Union, PayPal9. Delivery time:30 ~60 days after confirm the order
Свяжитесь с нами
1.Reasonable price with excellent quality.2.Abundant stock and prompt delivery.3.Rich supply and export experience, sincere service.4.Reliable forwarder, 2-hour away from port.1. Standard:ASME B16.5; ASME B 16.47 Series A(MSS SP-44); ASME B 16.47 Series BAWWA C2072. Type:Plate flange, Slip on ,Threaded, Irrigation,Blind, Lap Joint flange.3. Pressure Class:Class 150; Class 300;Class 400;Class 600;Class 900;Class 1500;Class 25004. Size1/2"-48"5. Surface Treament:Anti-rust oil; Yellow paint; Black paint;Hot dip Galavnised; Zinc.6. Raw Material:A105; A105N7.
Свяжитесь с нами
Flanged fittings with rating class designation400, 600, 900, and 1500 in sizes NPS 1⁄2 through NPS 24and flanged fittings with rating class designation 2500in sizes 1⁄2 through NPS 12 that are acknowledged inNonmandatory Appendix E in which only U.S.Customary units are provided 1. Standard:DIN2502,DIN2503,DIN2527,DIN2566.DIN2573,DIN2576; DIN2633 ; DIN2632; DIN2631;DIN25662. Type:Plate flange, Threaded, Irrigation,Blind, Lap Joint flange.3. Pressure Class:PN6;PN10; PN16; PN25; PN40; 4. Dimension:DN10-20005.
Свяжитесь с нами
Rat ings for welding neck flanges covered by this Standard are based upon their hubs at the welding endhaving thickness at least equal to that calculated for pipe having 276 MPa (40,000 psi) specified minimum yieldstrength.1
In order to ensure adequate flange hub thick ness for flange sizes NPS 2 and larger, the bore of awelding neck flange, dimension B in the various dimen sional t ables, shall not exceed Bmax det ermined asfollows: 1. Standard:DIN2502,DIN2503,DIN2527,DIN2566.DIN2573,DIN2576; DIN2633 ; DIN2632; DIN2631;DIN25662.
Свяжитесь с нами
Flanges Introduction:A flange is a method of connecting pipes, valves, pumps and other equipment to form a pipework system. It also provides easy access for cleaning, inspection or modification. Flanges are usually welded or crewed into such systems and then joined with bolts.Product Specification:1. Standard:ASME B16.5; ASME B 16.47 Series A(MSS SP-44); ASME B 16.47 Series BAWWA C2072. Type:Plate flange, Slip on ,Threaded, Irrigation,Blind, Lap Joint flange.3. Pressure Class:Class 150; Class 300;Class 400;Class 600;Class 900;Class 1500;Class 25004. Size1/2"-48"5.
Свяжитесь с нами
Product Specification:1. Standard:ASME B16.5; ASME B 16.47 Series A(MSS SP-44); ASME B 16.47 Series BAWWA C2072. Type:Plate flange, Slip on ,Threaded, Irrigation,Blind, Lap Joint flange.3. Pressure Class:Class 150; Class 300;Class 400;Class 600;Class 900;Class 1500;Class 25004. Size1/2"-48"5. Surface Treament:Anti-rust oil; Yellow paint; Black paint;Hot dip Galavnised; Zinc.6. Raw Material:A105; A105N7. PackingWooden Case, Pallet.8. Payment:L/C at sight, T/T, Western Union, PayPal9.
Свяжитесь с нами
Flanges Introduction:A flange is a method of connecting pipes, valves, pumps and other equipment to form a pipework system. It also provides easy access for cleaning, inspection or modification. Flanges are usually welded or crewed into such systems and then joined with bolts.Product Specification:1. Standard:ASME B16.5; ASME B 16.47 Series A(MSS SP-44); ASME B 16.47 Series BAWWA C2072. Type:Plate flange, Slip on ,Threaded, Irrigation,Blind, Lap Joint flange.3. Pressure Class:Class 150; Class 300;Class 400;Class 600;Class 900;Class 1500;Class 25004. Size1/2"-48"5.
Свяжитесь с нами
Forged flange with low carbon content is not easy to rust, the forgings have good streamlining, dense organization and good mechanical properties.Standard:ASME B16.5; ASME B 16.47 Series A(MSS SP-44); ASME B 16.47 Series BAWWA C207Type: Plate flange, Slip on ,Threaded, Irrigation,Blind, Lap Joint flange.1. Standard:ASME B16.5; ASME B 16.47 Series A(MSS SP-44); ASME B 16.47 Series BAWWA C2072. Type:Plate flange, Slip on ,Threaded, Irrigation,Blind, Lap Joint flange.3. Pressure Class:Class 150; Class 300;Class 400;Class 600;Class 900;Class 1500;Class 25004. Size1/2"-48"5.
Свяжитесь с нами
Product Specification: 1. Standard:ASME B16.5; ASME B 16.47 Series A(MSS SP-44); ASME B 16.47 Series BAWWA C2072. Type:Plate flange, Slip on ,Threaded, Irrigation,Blind, Lap Joint flange.3. Pressure Class:Class 150; Class 300;Class 400;Class 600;Class 900;Class 1500;Class 25004. Size1/2"-48"5. Surface Treament:Anti-rust oil; Yellow paint; Black paint;Hot dip Galavnised; Zinc.6. Raw Material:A105; A105N7. PackingWooden Case, Pallet.8. Payment:L/C at sight, T/T, Western Union, PayPal9.
Свяжитесь с нами
ASME/ANSI B16.5 provides dimensions and tolerances for flanges in pipe sizes from1/2" through 24" and in pressure classes from 150 lb through 600 lb.1. Standard:ASME B16.5; ASME B 16.47 Series A(MSS SP-44); ASME B 16.47 Series BAWWA C2072. Type:Plate flange, Slip on ,Threaded, Irrigation,Blind, Lap Joint flange.3. Pressure Class:Class 150; Class 300;Class 400;Class 600;Class 900;Class 1500;Class 25004. Size1/2"-48"5. Surface Treament:Anti-rust oil; Yellow paint; Black paint;Hot dip Galavnised; Zinc.6. Raw Material:A105; A105N7. PackingWooden Case, Pallet.8.
Свяжитесь с нами
Flanges Introduction:A flange is a method of connecting pipes, valves, pumps and other equipment to form a pipework system. It also provides easy access for cleaning, inspection or modification. Flanges are usually welded or crewed into such systems and then joined with bolts.Product Specification:1. Standard:ASME B16.5; ASME B 16.47 Series A(MSS SP-44); ASME B 16.47 Series BAWWA C2072. Type:Plate flange, Slip on ,Threaded, Irrigation,Blind, Lap Joint flange.3. Pressure Class:Class 150; Class 300;Class 400;Class 600;Class 900;Class 1500;Class 25004. Size1/2"-48"5.
Свяжитесь с нами
When building a pipeline, the length of the pipes used are not always known. By manufacturing the pipe separate from the flange plate, the welders can cut the pipe to length and weld a flange plate in place to join the pipes at any needed length. The plates can also be welded to the pipe on a slight bias, allowing two pipes to be joined that may not be precisely lined up.1. Standard:ASME B16.5; ASME B 16.47 Series A(MSS SP-44); ASME B 16.47 Series BAWWA C2072. Type:Plate flange, Slip on ,Threaded, Irrigation,Blind, Lap Joint flange.3.
Свяжитесь с нами
Product Specification: 1. Standard:ASME B16.5; ASME B 16.47 Series A(MSS SP-44); ASME B 16.47 Series BAWWA C2072. Type:Plate flange, Slip on ,Threaded, Irrigation,Blind, Lap Joint flange.3. Pressure Class:Class 150; Class 300;Class 400;Class 600;Class 900;Class 1500;Class 25004. Size1/2"-48"5. Surface Treament:Anti-rust oil; Yellow paint; Black paint;Hot dip Galavnised; Zinc.6. Raw Material:A105; A105N7. PackingWooden Case, Pallet.8. Payment:L/C at sight, T/T, Western Union, PayPal9.
Свяжитесь с нами
